Master Bond EP114 is a two component, low viscosity, NASA low outgassing rated, heat cured epoxy that can be effectively utilised for under fill, coating, impregnating, and porosity sealing applications. This optically clear compound features high dimensional stability due to its nano-silica filler material. It has been successfully tested for abrasion resistance per ASTM D4060-14 and readily withstands 1,000 hours at 85°C and 85% relative humidity.
EP114 has excellent electrical insulation properties, with a volume resistivity greater than 1014 ohm-cm and a dielectric constant of 3.35 (60Hz) at 25°C. This system features an exceptionally low coefficient of thermal expansion of 20-22 x 10-6 in/in/°C, along with a compressive strength of 24,000-26,000 psi, an ultra-high modulus of more than 1,000,000 psi, and a hardness of 85-95 Shore D at 25°C. Also, it has a glass transition temperature of more than 200°C.
EP114 features excellent flow properties, with a mixed viscosity of 500-1,500 cps, and it offers a long working life after mixing. For example, a 100-gram batch at 25°C will yield an open time of two to four days. The system requires heat for curing. One of the many recommended cure schedules is two to three hours at 125°C followed by five to eight hours at 150°C, with a two hour or longer post cure at 150-200°C. It is available in various packaging options: syringe kits, 1/2-pint kits, pint kits, and quart kits. It can also be packaged in pre-mixed and frozen syringes, which require storage at -40°C and are suitable for automated dispensing.
For more information, please visit our product page.